This Super High Speed F1 Wing is designed for extraordinary high speed FPV experience. It’s symmetric airfoil driven by 4S power system provide very strong and smooth thrust, meanwhile, we use High Density but Solid EPP foam to ensure the whole air-frame super rigid and crash resistance, the built-in plastic hinge inside the aileron provide very accurate reaction from radio control for combat fly, this wing is compact and portable for out-door FPV flying because of the detachable main wing. You can install your FPV gear and 4S battery inside the spacious hatch with “NACA” air-inlet and outlet. The digital servo’s arm were very well protected by the aerodynamic plastic cover, the bottom of the fuselage were also protected by plastic parts as well. We believe this robust Formula 1 Wing will exhilarate you greatly from the normal FPV flying.
Brand Name: SONICMODELL
Item Name: F1 Wing
Flying speed: 20km/h - 190+km/h
Motor: 2216 2000kv(Shaft Diameter: 5mm)
ESC: 40A 3-4S(XT60 connector)
Servo: 2pcs 9g digital servo
Propeller: 6x4.5 in default
Recommended Battery: 14.8V 1800-2200mAh 30C (not including)
* High Density EPP molded wing and fuselage, super hard and rigid, plus pre-built in carbon fiber spar, durable and flexible
* Detachable wing structure, compact size, portable and easy to take for out door FPV fly.
* Built-in plastic hinge inside the aileron provide very accurate reaction from radio control
* Symmetric airfoil driven by 4S power system provide very strong and smooth thrust.
* “No-glue” required assembly, open box and fly in few seconds
* With plastic aerodynamic cover to protect the digital servo arm
* Spacious equipment bay for more FPV gear.
* With plastic cover to protect the fuselage bottom from landing scratch
* With bump for “CG” mark under the main wing.
* With "NACA" Air inlet and outlet for FPV gear cooling
1X F1 Wing PNP with pre-installed motor / ESC / servos (FPV Camera / Battery / radio controller are not included)